Metro Office Resources, Inc.

Laser printer repair in Denver

Home Page

Service

Request Service Form

Printer Supplies

HP Toner Supplies

Maintenance Kits

Fuser Assemblies

HP Drums

Transfer Kits

HP Error Codes

error codes 0-19

error codes 20-49

error codes 50-59

error codes 60 up

A through E

F Through M

N through R

S through Z

color printer error codes

Contact Us

HP Laserjet Error Codes N-R
Message on printer Display Panel What it means. What to do. Additional comments.
OFFLINE The printer is offline Press GO or READY or ONLINE button to place the printer online.
OUTPUT BIN FULL alternates with CLEAR PAPER FROM [BINNAME] The output bin is full and needs to be emptied. Remove the sheets from the output bin (LH side of printer). Also, the output sensor could be out of alignment,  the photosensor for the output bin could be also bad.
PAPER WRAPPED AROUND FUSER Print media is wrapped around the fuser. 1. Turn the printer off to keep the media from wrapping more firmly around the fuser. 2. Open the top cover and remove the toner cartridge. 3. Remove all the visible media. 4. Leave the printer turned off and remove the fuser to remove any remaining print media.
PERFORM PRINTER MAINTENANCE To ensure optimum print quality, the printer prompts the customer to have routine maintenance installed. Install the printer maintenance kit. You must reset the maintenance page count after performing printer maintenance. Note The printer maintenance kit is a consumable item and is not covered under the factory  warranty.
PROCESSING CLEANING PAGE The printer is conducting the manual cleaning-page process. Wait for the job to finish. This can take up to 2.5 minutes.
PROCESSING JOB The printer is processing a job. Wait for the job to finish. This can take several minutes for a complex print job. If the printer "hangs up" on processing a job then it could be a bad formatter board.
RAM DISK DEVICE FAILURE The RAM disk had a critical or fatal failure. 1. Reseat the RAM disk. 2. Replace the RAM disk.
RAM DISK FILE OPERATION FAILED The requested operation could not be performed (for example, attempting to download a file to a nonexistent directory). 1. Check the filename and directory name. 2. Reseat the RAM disk. 3. Retry the operation on printer.
RAM DISK FILE SYSTEM IS FULL The RAM disk file system is full. 1. Delete all unnecessary files and then try again, or turn the printer off, and then turn the printer on to delete all files on the device. (Delete files using HP Resource Manager or another software utility. See the software online help for more information.) 2. If the message persists, increase the size of the RAM disk. Change the RAM disk size from the configuration menu on the printer control panel. HP Resource Manager can also be used to increase or decrease the RAM disk size.

Metro Office Resources, Inc. ( get Mor for your money)    303-426-8448